Most people arriving at work are not thinking about what to do if a fire starts. That is why the law puts the responsibility on the employer, building owner or occupier to think about it for them. A fire risk assessment is how you do that: it shows what could start a fire, who could be hurt and what you need to put in place to prevent it.
Is a fire risk assessment a legal requirement?
Yes. Under the Regulatory Reform (Fire Safety) Order 2005, which has applied in England and Wales since October 2006, any business or organisation with non-domestic premises must carry out a fire risk assessment and keep it up to date. Fire certificates issued by the fire service were abolished at the same time, and the fire brigade no longer carries out assessments for you. The duty sits with you, usually with a qualified specialist doing the work.
It applies to offices, factories, shops, warehouses, hotels, care homes, hostels, clinics, village halls, sports centres, theatres and any other premises the public or employees use. It applies to every business, and the findings must be recorded in writing alongside who carried out or reviewed the assessment.
Who is the "responsible person"?
The responsible person is the employer or, where there is no employer, the owner, landlord or occupier who has control of the premises. Responsibility can be shared, for example between a landlord and a tenant. See who is responsible for completing a fire risk assessment.
What a fire risk assessment covers
A good assessment follows the same logic every time:
- Find the hazards: sources of ignition (heat or sparks), sources of fuel (paper, cardboard, packaging, waste) and anything that helps a fire spread.
- Identify who is at risk: staff, visitors, contractors and anyone especially vulnerable, such as people with disabilities, lone workers or people who work out of hours.
- Remove or reduce the risk: avoid the hazard altogether if you can. If you cannot, reduce and manage it.
- Protect people if a fire does start: escape routes, detection, warning, firefighting equipment and an evacuation plan.
- Record, inform and train: write down the findings, share the plan with everyone on site and train the people who need it.
- Review: an assessment is a living document, not a one-off.
Common problems an assessment turns up include overloaded sockets, waste stored in spare rooms, old or untested electrical equipment, poorly maintained heaters and procedures that have never been rehearsed.
What the assessor will check
| Area | What is checked | Read more |
|---|---|---|
| Escape routes and signage | Routes are clear, signed and lead to a safe place; the age and layout of the building is taken into account | Fire safety signage |
| Detection and alarms | The right system for your premises, tested and serviced regularly | Fire alarm testing and servicing guide |
| Emergency lighting | Corridors and exits stay lit in a power cut or fire, which is often the only light available | Emergency lighting guide |
| Fire extinguishers | The right type, in the right place, in date | Choosing fire extinguishers |
| Electrical risks | Overloaded sockets, trailing cables, equipment that has not been tested | PAT testing guide |
| People and procedures | Who calls 999, who is the fire warden, where people meet, whether drills happen | Fire warden training |
| Vulnerable people | A plan for anyone who would need help to leave | Covered in the assessment |
Why a bespoke, on-site assessment matters
Online surveys and generic templates exist, but every business is different. Knowing who does what, with which equipment and in which part of the building decides where alarms, extinguishers and escape routes need to be. An assessor on site sees what a template cannot. Read why generic fire risk assessments are not good enough.
The sooner people know about a fire, the better their chance of putting it out or getting out. That is part of your duty of care to employees and customers.
How often should it be reviewed?
Review your assessment regularly – we recommend once a year, or even sooner whenever something changes. This could include:
- Building work, a new layout or a change in how rooms are used
- New equipment, processes, products or stored materials
- A rise in staff numbers, or more people with mobility or sensory needs
- A change in who handles fire safety, such as a fire warden leaving or being away. Always name deputies and train them.
- A fire, near miss or false alarm that exposed a weakness
The pandemic gave a useful lesson here. Businesses that moved desks apart, introduced one-way entrances or exits, propped doors open for ventilation or ran staggered hours all changed their fire risk without noticing. Fire doors only work if they are closed, or held open by an automatic hold-open device that releases on the alarm. Extra equipment on a new desk layout can overload sockets, and cables across open floor become trip hazards in an evacuation.
What happens if you do not have one?
If the fire and rescue service inspects and finds problems, it can issue a notice setting out the changes you must make. Ignoring it, or not even having a suitable assessment, can lead to court action, fines and, for serious breaches, imprisonment. There are commercial consequences too: an insurer may refuse to pay out if your assessment is out of date, and a fire can end a business. See the real cost of a business fire.
Insurance, cost and getting value from the report
Insurers prefer businesses that manage risk and may offer lower premiums if you follow their recommendations. Some will send an assessor themselves.
The recommendations can feel expensive: changing how flammable items are stored, testing electrical equipment more often, moving or replacing detectors where a room's use has changed, or adding call points. A good report prioritises its actions, so you can build a plan and spread the cost over time rather than facing one large bill every few years. Most alarm devices cost little compared with the damage they prevent.
Who should carry it out?
A competent person. If you do not have the time or expertise in-house, use a qualified fire safety specialist that is independent of the local authority, so you are well prepared if an inspection is unannounced.
Not sure when yours was last done?
If you have to stop and think, it has probably been too long. Our team carries out on-site fire risk assessments across Milton Keynes, Northampton, Oxford, Bedford, Luton and Aylesbury. Book a fire risk assessment or call 01908 564301.
Further reading: Workplace fire safety: your responsibilities (GOV.UK)

